FJ Cruiser Trail Series Dual Swing Rear Bumper

Our new, first of its kind dual swing-out design (patent-pending) for the Toyota FJ Cruiser is finally here!

An industry-first latch mechanism and swing motion design keep things tight and rattle-free during extended or strenuous off-road adventures.

Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
Approximate weight 200lbs
1" thick 3/4 recovery shackle mounts
Optional textured black powder coat
Does not include rear sensor cutout locations
Industry-first latch mechanism design for consumer ease of use
Utilizes stock receiver hitch
Integrated light ports
Designed and made in The U.S.A
Please note, A narrow wheel with an extreme positive offset or a very wide tire will not work with the standard tire mount

Delivery dates are an estimate only and not guaranteed. We highly recommend customers wait until they have the product in hand to schedule installations. All cancellations are required in writing and will incur a 10% re-stock fee per order and any applicable packaging and shipping fees. Please review terms and conditions for details.
* Please note that model years equipped with the blindspot monitor may not function with an aftermarket bumper due to the monitor's capability to sense through steel.

This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov

FJ Cruiser Trail Series Rear Bumper with Smooth Motion Tire Carrier System

FJ Cruiser Trail Series Rear Bumper with Smooth Motion Tire Carrier System
High-grade precision cut 3/16" steel
Approximate weight 125lbs
1" thick 3/4" recovery shackle mounts (D-rings can be added at additional cost)
Optional textured black powder coat (see pricing options below)
Designed to utilize the stock receiver hitch and back up sensors
Integrated 4" light ports (*see light options below)
Bumper may also be ordered without the tire carrier (see fj rear)
Designed & Made in The U.S.A
--We highly recommend purchasing the Expedition One FJ Cruiser Rear Back Up Camera Bracket to relocate the OEM Back up Camera.
-Regardless of your light purchase, bumper comes equipped with port holes for lights.
-FJ Rear sensors on certain model years/regions may require minor drilling/re-shaping holes with file, Dremel, or drill bit due to variation in shapes on Toyota sensors.
-Please note, a narrow wheel with an extreme positive offset or a very wide tire will not work with the standard tire mount

This product contains chemicals known to the state of California to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov

Product Features:

• Exclusive to Expedition One Tire Carrier is the Smooth Motion STC system which mounts to the rear gate and swings in unison with the door. Urethane bushings work as isolaters to keep the carrier rattle free.
• No drilling into the body required, uses factory mounting locations.
• Weighs approximately 125lb.
• Internal integrated reverse light ports.
• Designed to work with your factory receiver hitch and back up sensors.
• May accommodate up to 36 inch tire depending on wheel tire combo
• 1 inch thick integrated recovery mounts are integrated directly into the internal structure of the bumper for maximum strength and recovery power.
• Heavy duty assembly with tapered bearing packs for smooth consistent motion, longevity, and maintainability.

FJ Cruiser Trail Series Rear Bumper

High-grade precision cut 3/16" steel
Weighs Approx. 95lbs
1" thick 3/4" recovery shackle mounts (3/4" shackles can be added at additional cost)
Optional textured black powder coat (see pricing options below)
Designed to utilize the stock receiver hitch and back up sensors
Integrated 4" light ports (*see light options below)
Bumper may also be ordered with the tire carrier (see fj cruiser rear with stc)
Designed & Made in The U.S.A
Regardless of your light purchase, bumper comes equipped with port holes for lights.
**FJ Rear sensors on certain model years/regions may require minor drilling/re-shaping holes with file, Dremel, or drill bit due to variation in shapes on Toyota sensors.

This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov

Product Features:

• Comprised of 3/16 inch steel inner structure and 1/8 inch outer structure.
• No drilling into the body required, uses factory mounting locations.
• Weighs approximately 80 lb.
• Internal integrated reverse light ports.
• Designed to work with your factory receiver hitch and back up sensors.
• 1 inch thick integrated recovery mounts are integrated directly into the internal structure of the bumper for maximum strength and recovery power.

FJ Cruiser Trail Series Rocker Guards

Industry Leading FJ Cruiser Rocker Guards
Specifications
· Comprised of 3/16" and 1/8" sheet steel and 0.120" wall high strength tubing.
· Triangular boxed structure for maximum strength and efficiency.
· Tubing is comprised of 2" x 0.120" wall for the inner and 1.5" x 0.120" outer wall tubing.
· Kick-out at the back of the outer tubing.
· Steps with aluminum tread plates assist in entering and exiting the vehicle.
· Placed to maximize ground clearance.
· Optional textured black powder coat (see pricing options below).
· Approx. weight 45 lbs each
We highly recommend customers wait until they have the product in hand to schedule installations.

This product contains chemicals known to the state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.gov