FJ Cruiser Trail Series Base Front Bumper

Comprised of a 3/16" inner structure and 1/8" thick outer skin
Approx. weight just over 100lbs.
Integrated winch mount
1" thick 3/4 recovery shackle mounts (3/4" shackles may be added to purchase)
Optional center hoop and textured black powder coat (see pricing options below)
4.75" integrated light ports* (see pricing options below)
Hi-lift jack mount points
Top Light tabs fit up to two, 7" round lights under center hoop bar area
Fits most winches with integrated solenoid (or relocate it) rated up to 9500lbs
Designed and made in The U.S.A

This product contains chemicals known to the state of california to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.gov

Product Features:

• Comprised of a 3/16 inch thick inner structure and 1/8 inch thick outer structure.
• Fits most winches rated up to 10,000 lbs. (exceptions include Warn PowerPlant and M8274) If solenoid is not integrated it may need to be relocated.
• Weights approx. 110 lbs
• Integrated winch mount standard.
• 1 inch thick recovery shackle mounts integrated directly into the internal structure for maximum strength and recovery power. (Shackles may be purchased separately)
• Designed to maximize approach and departure angles. High clearance side wings and frontal pan.
• 4.75 inch integrated light ports. (see light options above)
• Hi-lift jack mount points for easy assistance with recovery operations and trail fixes.
• Two light mount tabs on top of bumper can fit up to 7 inch round lights.
• Designed and Made in the U.S.A.

FJ Cruiser Trail Series Hoop Front Bumper

Comprised of a 3/16" inner structure and 1/8" thick outer skin
Approx. weight just over 100lbs.
Integrated winch mount
1" thick 3/4 recovery shackle mounts (3/4" shackles may be added to purchase)
Optional center hoop and textured black powder coat (see pricing options below)
4.75" integrated light ports* (see pricing options below)
Hi-lift jack mount points
Top Light tabs fit up to two, 7" round lights under center hoop bar area
Fits most winches with integrated solenoid (or relocate it) rated up to 9500lbs
Designed and made in The U.S.A

This product contains chemicals known to the state of california to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.gov

Product Features:

• Comprised of a 3/16 inch thick inner structure and 1/8 inch thick outer structure. Comes standard with rugged .120 inch wall tubing to maximize strength and protection.
• Weighs approximately 115lbs.
• Fits most winches rated up to 10,000 lbs. (exceptions include Warn PowerPlant and M8274) If solenoid is not integrated it may need to be relocated.
• Integrated winch mount standard.
• 1 inch thick recovery shackle mounts integrated directly into the internal structure for maximum strength and recovery power. (Shackles may be purchased separately)
• Designed to maximize approach and departure angles. High clearance side wings and frontal pan.
• 4.75 inch integrated light ports. (see options above)
• Hi-lift jack mount points for easy assistance with recovery operations and trail fixes.
• Two light mount tabs can fit up to 7 inch round lights under the center hoop, placed strategically to protect your investment.
• Designed and Made in the U.S.A.

FJ Cruiser Trail Series Diamond Style Front Bumper

Comprised of a 3/16" inner structure and 1/8" thick outer skin
Approx. bumper weight just over 110lbs
Includes integrated winch mount
Hi-lift mount jack points
Two light tabs allow you to mount up to 7 inch round lights under the center hoop
1" thick 3/4 recovery shackle mounts (3/4" shackles may be purchased at an additional cost)
Optional textured black powder coat (*see pricing options below)
4.75" integrated light ports (*see pricing options below)
Fits most winches with integrated solenoid (or relocate solenoid) rated up to 9500lbs
Designed and made in The U.S.A
This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov

Product Features:

• Comprised of a 3/16 inch thick inner structure and 1/8 inch thick outer structure. Comes standard with rugged .120 inch wall tubing to maximize strength and protection.
• Weighs approximately 120lbs.
• Fits most winches rated up to 10,000 lbs. (exceptions include Warn PowerPlant and M8274) If solenoid is not integrated it may need to be relocated.
• Integrated winch mount standard.
• 1 inch thick recovery shackle mounts integrated directly into the internal structure for maximum strength and recovery power. (Shackles may be purchased separately)
• Designed to maximize approach and departure angles. High clearance side wings and frontal pan.
• 4.75 inch integrated light ports. (see options above)
• Hi-lift jack mount points for easy assistance with recovery operations and trail fixes.
• Two light mount tabs can fit up to 7 inch round light under the center hoop, placed strategically to protect your investment.
• Designed and Made in the U.S.A.

FJ Cruiser Trail Series Kodiak Style Front Bumper

Comprised of a 3/16" inner structure and 1/8" thick outer skin
Approx. bumper weight just over 110lbs
Includes integrated winch mount
Hi-lift mount jack points
Two light tabs allow you to mount up to 7 inch round lights under the center hoop
1" thick 3/4 recovery shackle mounts (3/4" shackles may be purchased at an additional cost)
Optional textured black powder coat (*see pricing options below)
4.75" integrated light ports (*see pricing options below)
Fits most winches with integrated solenoid (or relocate solenoid) rated up to 9500lbs
Designed and made in The U.S.A

*Regardless of your light purchase, all FJ bumpers come with light port holes.

Product Features:

• Comprised of a 3/16 inch thick inner structure and 1/8 inch thick outer structure. Comes standard with rugged .120 inch wall tubing to maximize strength and protection.
• Weighs approximately 120lbs.
• Fits most winches rated up to 10,000 lbs. (exceptions include Warn PowerPlant and M8274) If solenoid is not integrated it may need to be relocated.
• Integrated winch mount standard.
• 1 inch thick recovery shackle mounts integrated directly into the internal structure for maximum recovery strength. (Shackles may be purchased separately)
• Designed with high clearance side wings and frontal pan to maximize approach and departure angles.
• 4.75 inch integrated light ports. (see options above)
• Hi-lift jack mount points for easy assistance with recovery operations and trail fixes.
• Two light mount tabs can fit up to 7 inch round lights under the center hoop, placed strategically to protect your investment.
• Designed and Made in the U.S.A.

FJ Cruiser Trail Series WyoOtto Front Bumper

The main hoop formed from a single length of 1.5"x .120 wall tubing
Integrated winch mount
Approx. weight 140lbs
Integrated 1" thick recovery mounts (3/4" shackles may be purchased at an additional cost)
Fits most winches with integrated solenoid (or relocate solenoid) rated up to 9500lbs
Hi-lift jack mount points
Light mount tabs fit up to two, 7" round lights under center hoop bar
4.75" integrated light ports (*see pricing options below)
Optional textured black powder coat (see pricing options below)
Designed and made in the U.S.A.
*Regardless of your light purchase, all FJ bumpers come with light ports.

This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov

Product Features:

• Comprised of a 3/16 inch thick inner structure and 1/8 inch thick outer structure. Comes standard with rugged .120 inch wall tubing to maximize strength and protection.
• Weighs approximately 140lbs.
• Fits most winches rated up to 10,000 lbs. (exceptions include Warn PowerPlant and M8274) If solenoid is not integrated it may need to be relocated.
• Integrated winch mount standard.
• 1 inch thick recovery shackle mounts integrated directly into the internal structure for maximum strength and recovery power (Shackles may be purchased separately)
• Designed to maximize approach and departure angles. High clearance side wings and frontal pan.
• 4.75 inch integrated light ports (see options above.)
• Hi-lift jack mount points for easy assistance with recovery operations and trail fixes.
• Two light mount tabs can fit up to 7 inch round lights under the cente r hoop, placed strategically to protect your investment.
• Designed and Made in the U.S.A.

FJ Cruiser Trail Series Bull Bar Style Front Bumper

Comprised of a 3/16" inner structure and 1/8" thick outer skin
Approx. bumper weight just over 110lbs
Includes integrated winch mount
Hi-lift mount jack points
Two light tabs allow you to mount up to 7 inch round lights under the center hoop
1" thick 3/4 recovery shackle mounts (3/4" shackles may be purchased at an additional cost)
Optional textured black powder coat (*see pricing options below)
4.75" integrated light ports (*see pricing options below)
Fits most winches with integrated solenoid (or relocate solenoid) rated up to 9500lbs
Designed and made in The U.S.A
*Regardless of your light purchase, all FJ bumpers come with light ports.

This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov

Product Features:

• Comprised of a 3/16 inch thick inner structure and 1/8 inch thick outer structure. Comes standard with rugged .120 inch wall tubing to maximize strength and protection.
• Weighs approximately 120lbs.
• Fits most winches rated up to 10,000 lbs. (exceptions include Warn PowerPlant and M8274) If solenoid is not integrated it may need to be relocated.
• Integrated winch mount standard.
• 1 inch thick recovery shackle mounts integrated directly into the internal structure for maximum strength and recovery power. (Shackles may be purchased separately)
• Designed to maximize approach and departure angles. High clearance side wings and frontal pan.
• 4.75 inch integrated light ports. (see options above)
• Two light mount tabs can fit up to 7 inch round lights under the center hoop, placed strategically to protect your investment.
• Designed and Made in the U.S.A.

Toyota FJ Cruiser Mule Ultra Roof Rack

The Mule Ultra roof rack model for the Toyota FJ Cruiser! A light-weight all-aluminum design that strikes a balance between looks and functionality.

Features
Optional front fascia light bar cutout (fits up to a 40" led light bar)
Dynamic load capacity: 250lbs | Static load capacity: 500lbs
Made of all-aluminum light-weight construction
Flat load bar rail system
Roof Top Tent Load Bar System (Coming Soon)
Flexible mounting points along the internal railings
Each roof rack model is specific to each vehicle application for exact look & function
Works with most universal mounting accessory systems
Expedition One Accessory mounting options coming soon!
Designed & built here in the USA

RACK MODEL OUTSIDE WIDTH INSIDE WIDTH OUTSIDE LENGTH INSIDE LENGTH OUTSIDE HEIGHT

FJ CRUISER 48.38” 41.19” 90.28” 74.88” 6.17”

PRODUCT FEATURES:
Lightweight, aluminum construction
Modular Design
Adjustable Flooring Design
Flexible tie-down points
Form fitting around each vehicle application
Optional front fascia light bar cutout
Fits up to a 40" led light bar