Chevy 2007 - 2014 RangeMax Rear Bumper

Chevy RangeMax series rear bumper for the 2007-2014 Chevy 2500-3500.
Comprised of a beefy 3/16 inch inner and 3/16 inch outer structure.
Integrated 1 inch thick shackle mounts fit a 3/4 inch shackle.
Optional textured black powder coat.
Optional winch plate mount can accommodate a winch rated 8,000-12,500 lbs.
Integrated 4.75 inch light ports.
Works with the factory rear back up sensors if so equipped.*
Designed and Made in the U.S.A.
*Due to customer requests, we have added sensor hole locations as a standard feature on our Full-size bumpers however, we cannot guarantee that the factory infrared sensors will work with the bumper.

This product contains chemicals known to the state of california to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.gov

Product Features:

• Comprised of a beefy 3/16 inch inner and 3/16 inch outer structure.
• Integrated 1 inch thick shackle mounts fit a 3/4 inch shackle.
• Optional textured black powder coat.
• Weighs approx. 125lbs
• Optional winch plate mount can accommodate a winch rated 8,000-12,500 lbs.
• Integrated 4.75 inch light ports.
• Works with the factory rear back up sensors if so equipped.*
• Designed and Made in the U.S.A.

15+ Chevy 1500/2500/3500 Dual Swing Rear Bumper

The Expedition One dual swing-out rear bumper with our innovative, patented locking latch system! An intuitive new way to open and close your swing arms with ease and reliability.

These carriers can be locked into place when fully opened providing the flexibility needed for overlanding and off-roading, and the ease of access you want in your daily driver. Our additional mounting options provide further customization to create the perfect setup for your outdoor adventuring needs.


Available Mounting Accessory Options



Hi-Lift Mount
Hi-Lift/Pul Pal Mount
Expedition One Geri Fuel/Water Mount & Latch
Scepter/NATO Fuel Can Mount (does not currently work with water cans)
Spare Tire Mount (recommended up to 37" tire)
Features:

Patent-Pending locking latch system design that offers an intuitive and easy way to access your truck
Universal plate backing on swing arms for limitless mounting configurations
Weighs approx. 225lbs
Additional Expedition One mounting products for spare tire, hi-lift, Geri /scepter/NATO cans, TREDs/Maxtrax, etc
Holds up to a 40" tire with certain wheel/tire combinations (recommended size: up to a 37" tire)
Quick access to arm bearings for easy maintenance
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
100% Designed & Made here in the U.S.A
Please note, a narrow wheel with an extreme positive offset or a very wide tire will not work with the standard tire mount

* model years equipped with the blindspot monitor may not function with an aftermarket bumper due to the monitors capability to sense through steel.

This product contains chemicals known to the state of california to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.gov
FAQ
60" jack will fit on the hi-lift/pullpal combo we just don't recommend it due to the height of the jack once mounted---it will sit approx 2' over back of truck.
hi-lift/pul pall can be mounted on either side of arm depending on configuration you are looking for.