Tacoma 2005-2015
05-15 Tacoma Base Rear Bumper
05-15 Tacoma Base Rear Bumper
The Expedition One RangeMax Tacoma Rear for the 2nd Gen Toyota Tacoma
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
Approximate weight 80lbs
1" thick 3/4 recovery shackle mounts (3/4" shackles may be purchased here)
Optional textured black powder coat
Integrated 3.5" light ports
Designed and made in The U.S.A
NOTE: Tacomas equipped with tow packages without OEM receiver hitch may require modification
* Please note that model years equipped with the blindspot monitor may not function with an aftermarket bumper due to the monitor's capability to sense through steel.
This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov
05-15 Tacoma Standard Dual Swing Rear Bumper
05-15 Tacoma Standard Dual Swing Rear Bumper
Our innovative, industry-changing dual swing latch design is now available for the 2nd Gen Toyota Tacoma!
Featuring a first of its kind latch mechanism allowing for an intuitive and rugged system to keep your tire and gear secure out on the trails.
These carriers can be locked into place when fully opened providing the flexibility needed for overlanding and off-roading, and the ease of access you want in your daily driver. Our additional mounting options provide further customization to create the perfect setup for your outdoor adventuring needs.
Features:
Patent-Pending locking latch system design that offers an intuitive and easy way to access your truck
Universal plate backing on swing arms for limitless mounting configurations
Weighs approx. 200lbs
Additional Expedition One mounting products for spare tire, hi-lift, geri /scepter/NATO cans, TREDs/Maxtrax, etc
Holds up to a 37" tire with certain wheel/tire combinations (recommended size: up to a 35" tire)
Quick access to arm bearings for easy maintenance
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
100% Designed & Made here in the U.S.A
Available Mounting Options:
Hi-Lift Mount
Hi-Lift/Pul Pal Mount
Expedition One Geri Fuel/Water Mount & Latch
Scepter/NATO Fuel Can Mount (does not currently work with water cans)
Spare Tire Mount (recommended up to 35" tire)
2nd Gen Toyota Tacoma High Clearance Dual Swing Rear Bumper (Wrap-Around)
2nd Gen Toyota Tacoma High Clearance Dual Swing Rear Bumper (Wrap-Around)
Our innovative, industry-changing dual swing latch design is now available for the 2nd Gen Toyota Tacoma!
Featuring a first of its kind latch mechanism allowing for an intuitive and rugged system to keep your tire and gear secure out on the trails.
These carriers can be locked into place when fully opened providing the flexibility needed for overlanding and off-roading, and the ease of access you want in your daily driver. Our additional mounting options provide further customization to create the perfect setup for your outdoor adventuring needs.
Features:
Patent-Pending locking latch system design that offers an intuitive and easy way to access your truck
Universal plate backing on swing arms for limitless mounting configurations
Weighs approx. 200lbs
Additional Expedition One mounting products for spare tire, hi-lift, geri /scepter/NATO cans, TREDs/Maxtrax, etc
Holds up to a 37" tire with certain wheel/tire combinations (recommended size: up to a 35" tire)
Quick access to arm bearings for easy maintenance
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
100% Designed & Made here in the U.S.A
Available Mounting Options:
Hi-Lift Mount
Hi-Lift/Pul Pal Mount
Expedition One Geri Fuel/Water Mount & Latch
Scepter/NATO Fuel Can Mount (does not currently work with water cans)
Spare Tire Mount (recommended up to 35" tire)
TACOMA 05-15 model Series S3 Single Swing Rear Bumper Carrier System
TACOMA 05-15 model Series S3 Single Swing Rear Bumper Carrier System
*Shown on 19+ Ram 1500 / Jeep Gladiator above. New Images coming soon!*
The Expedition One Trail Series S3 Single Swing Rear Bumper Carrier System latch design for the TACOMA 05-15 model.
Featuring a first of its kind latch mechanism allowing for an intuitive and rugged system to keep your tire and gear secure out on the trails.
These carriers can be locked into place when fully opened providing the flexibility needed for overlanding and off-roading, and the ease of access you want in your daily driver. Our additional mounting options provide further customization to create the perfect setup for your outdoor adventuring needs.
Features:
Patent-Pending locking latch system design that offers an intuitive and easy way to access your truck
Weighs approx. 180 lbs
Universal spare tire mount included in bumper price
Optional back-up camera mount
Additional Expedition One mounting products for Hi-lift and PullPal, Geri /Scepter/NATO cans
Holds up to a 37" tire with certain wheel/tire combinations (recommended size: up to a 35" tire)
Retains use of oem/stock receiver hitch
Quick access to arm bearings for easy maintenance
1" thick 3/4" recovery shackle mounts welded inside and out with additional internal reinforcement (optional screw pin shackles purchased separate)
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
100% Designed & Made here in the U.S.A with Rocky Mountain steel
Configurable Bolt-On Mounting Options. Can fit 1 accessory in addition to the tire at one time (with the exception of the horizontal hi-lift mount which sits behind the spare and does not take up mounting space on the arm):
Hi-Lift Jack Mount
Hi-Lift Jack/PullPal Mount
Expedition One Geri Fuel/Water Mount & Latch
Scepter/NATO Fuel Can Mount
TACOMA 05-15 model Series S3 Single Swing Rear Bumper Carrier System - High Clearance Cut
TACOMA 05-15 model Series S3 Single Swing Rear Bumper Carrier System - High Clearance Cut
*Shown on 19+ Ram 1500 / Jeep Gladiator above. New Images coming soon!*
The Expedition One Trail Series S3 Single Swing Rear Bumper Carrier System latch design for the TACOMA 05-15 model -High Clearance Cut
Featuring a first of its kind latch mechanism allowing for an intuitive and rugged system to keep your tire and gear secure out on the trails.
These carriers can be locked into place when fully opened providing the flexibility needed for overlanding and off-roading, and the ease of access you want in your daily driver. Our additional mounting options provide further customization to create the perfect setup for your outdoor adventuring needs.
Features:
Patent-Pending locking latch system design that offers an intuitive and easy way to access your truck
Weighs approx. 180 lbs
Universal spare tire mount included in bumper price
Optional back-up camera mount
Retains use of factory sensor holes. *Purchase of replacement sensor bezels is recommended if replacing the plastic OEM bumper
Additional Expedition One mounting products for Hi-lift and PullPal, Geri /Scepter/NATO cans
Holds up to a 37" tire with certain wheel/tire combinations (recommended size: up to a 35" tire)
Retains use of oem/stock receiver hitch
Quick access to arm bearings for easy maintenance
1" thick 3/4" recovery shackle mounts welded inside and out with additional internal reinforcement
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
100% Designed & Made here in the U.S.A with Rocky Mountain steel
Configurable Bolt-On Mounting Options. Can fit 1 accessory in addition to the tire at one time (with the exception of the horizontal hi-lift mount which sits behind the spare and does not take up mounting space on the arm):
Hi-Lift Jack Mount
Hi-Lift Jack/PullPal Mount
Expedition One Geri Fuel/Water Mount & Latch
Scepter/NATO Fuel Can Mount
Tacoma 2005-2011 Front Bumper
Tacoma 2005-2011 Front Bumper
Tacoma Front Winch Bumper for 2005-2011 model years
Available with no hoop, a single center hoop, or "kodiak" style full bullbar hoops
Comprised of heavy duty 3/16 inch inner and outer structure.
Weighs approximately 130 lbs.
Integrated feet forward winch mount included. Fits most winches rated between 8000-12,500lbs.
Recommended Winch: ComeUp Seal Gen2 9.5rsi
Integrated 1 inch thick shackle mounts can accommodate a 3/4 inch shackle.
Standard mount tabs for auxiliary lights.
Integrated light ports hold a 4.75 inch round light.
Design and Made in the U.S.A.
Tacoma 2012-2015 Front Bumper
Tacoma 2012-2015 Front Bumper
Toyota Tacoma Front Winch Bumper
Fits Tacoma model years 2012-2015
Available with no hoop, a center hoop only, or full kodiak style bullbar hoops
Comprised of heavy duty 3/16 inch inner and outer structure.
Weighs approximately 130 lbs.
Integrated feet forward winch mount included. Fits most winches rated between 8000-12,500lbs.
Recommended Winch: ComeUp Seal Gen2 9.5rsi
Integrated 1 inch thick shackle mounts can accommodate a 3/4 inch shackle.
Standard mount tabs for auxiliary lights.
Integrated light ports hold a 4.75 inch round light.
Design and Made in the U.S.A.
Tacoma 2005-2023 Rocker Guards
Tacoma 2005-2023 Rocker Guards
2005-2023 Tacoma Trail Series Rocker Guards for CrewCab Short Bed Models
Specifications
· Comprised of 3/16" and 1/8" sheet steel and 0.120" wall High Strength Tubing
· Triangular Boxed Structure for maximum strength and efficiency
· Tubing is comprised of 2" x 0.120" wall for the inner and 1.5" x 0.120" outer wall tubing
· Steps with Aluminum Tread Plates assist in entering and exiting the vehicle
· Placed to maximize ground clearance
· Optional Textured Black Powder Coat for Durability
We highly recommend customers wait until they have the product in hand to schedule installations.
This product contains chemicals known to the state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.gov