Jeep TJ Wrangler Rear Bumpers
TJ Wrangler Trail Series with Carrier
TJ Wrangler Trail Series with Carrier
Rear Smooth Tire Carrier is the new and improved GEN 3 Arm
Constructed of high-grade precision cut 3/16" steel.
1" thick 3/4" recovery shackle mounts (3/4" shackles may be added at an additional cost)
Smooth motion STC system allows you to open the tailgate in one smooth motion, no latches or pins
Accommodates spare up to 38" tall (varies depending on your specific wheel/tire combination)
Built-in hitch receiver
Add-on features such as CB antenna mount or hi-lift jack mount.
Optional textured black powder coat
Bumper may also be ordered without the tire carrier.
Hi-lift jack mount points
Designed and made in The U.S.A
This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov
Product Features:
- Comprised of 3/16 inch steel inner structure and 1/8 inch outer structure.
- Weighs approximately 110 lbs.
- Accomomodates up to 37 inch tall tire with 17 inch rim.
- 1 inch thick recovery shackle mounts integrated into bumper for maximum strength and recovery power. (Shackles may be purchased separately)
- Integrated receiver hitch.
- Clean look when used with 1" body lift.
- Designed to maximize approach and departure angles.
- Reinforced corners to protect from ground/rock impacts.
- Designed and Made in the U.S.A.
TJ Wrangler Trail Series Rear Bumper
TJ Wrangler Trail Series Rear Bumper
Rear Smooth Tire Carrier is the new and improved GEN 3 Arm
Constructed of high-grade precision cut 3/16" steel.
1" thick 3/4" recovery shackle mounts (3/4" shackles may be added at an additional cost)
Smooth motion STC system allows you to open the tailgate in one smooth motion, no latches or pins
Accommodates spare up to 38" tall (varies depending on your specific wheel/tire combination)
Built-in hitch receiver
Add-on features such as CB antenna mount or hi-lift jack mount.
Optional textured black powder coat
Bumper may also be ordered without the tire carrier.
Hi-lift jack mount points
Designed and made in The U.S.A
This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov
Product Features:
- Comprised of 3/16 inch steel inner and outer structure.
- Weighs approximately 70 lbs.
- 1 inch thick recovery shackle mounts integrated into bumper for maximum strength and recovery power. (Shackles may be purchased separately)
- Integrated receiver hitch.
- Designed to maximize approach and departure angles.
- Reinforced corners to protect from ground/rock impacts.
- Clean look when used with 1" body lift.
- Designed and Made in the U.S.A.