Jeep JK Wrangler Rear Bumpers
Jeep JK Wrangler Trail Series Rear Bumper with Smooth Motion Tire Carrier
Jeep JK Wrangler Trail Series Rear Bumper with Smooth Motion Tire Carrier
Expedition One Trail Series JK Wrangler Rear Bumper
Constructed of high-grade precision cut 3/16" steel.
1" thick 3/4" recovery shackle mounts (3/4" shackles may be added at an additional cost)
Designed to utilize the stock receiver hitch
Weighs Approx. 95lbs
Optional textured black powder coat
Hi-lift jack mount points
Designed and Made in The U.S.A
Pictured above is a bumper with tire carrier....if you would like to order the bumper with the tire carrier arm as pictured, please return to JK Products or see below for more information on the Hinged TeraFlex Tire Carrier.
This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov
Product Features:
- Comprised of PNO high grade steel -- 3/16 inch internal structure, 1/8 inch outer structure.
- Smooth Motion STC system allows carrier to swing with your gate in one smooth motion, no latches or pins to undo.
- Weighs approximately 140 lbs.
- 1 inch recovery shackle mounts for 3/4 inch shackles. (Shackles may added as an additional purchase)
- High lift recovery jacking points.
- Optional textured black powder coat. (see pricing options above)
- Designed and made in the U.S.A.
Jeep JK Wrangler Trail Series Rear Bumper
Jeep JK Wrangler Trail Series Rear Bumper
Expedition One Trail Series JK Wrangler Rear Bumper
Constructed of high-grade precision cut 3/16" steel.
1" thick 3/4" recovery shackle mounts (3/4" shackles may be added at an additional cost)
Designed to utilize the stock receiver hitch
Weighs Approx. 95lbs
Optional textured black powder coat
Hi-lift jack mount points
Designed and Made in The U.S.A
Pictured above is a bumper with tire carrier....if you would like to order the bumper with the tire carrier arm as pictured, please return to JK Products or see below for more information on the Hinged TeraFlex Tire Carrier.
This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov
Product Features:
- Comprised of PNO high grade steel -- 3/16 inch internal structure, 1/8 inch outer structure.
- Weighs approximately 95 lbs.
- 1 inch recovery shackle mounts for 3/4 inch shackles. (Shackles may be added as an additional purchase)
- High lift recovery jacking points.
- Optional textured black powder coat. (see pricing options above)
- Designed and made in the U.S.A.
Jeep JK Wrangler Core Series Rear Bumper with Smooth Motion Tire Carrier
Jeep JK Wrangler Core Series Rear Bumper with Smooth Motion Tire Carrier
Expedition One Core Series JK Wrangler Rear Bumper
Constructed of high-grade precision cut 3/16" steel.
1" thick 3/4" recovery shackle mounts (3/4" shackles may be added at an additional cost)
Designed to utilize the stock receiver hitch
Weighs Approx. 95lbs
Optional textured black powder coat
Hi-lift jack mount points
Designed and Made in The U.S.A
Pictured above is a bumper with tire carrier....if you would like to order the bumper with the tire carrier arm as pictured, please return to JK Products or see below for more information on the Hinged TeraFlex Tire Carrier.
This product contains chemicals known to the state of california to cause birth defects or
other reproductive harm. For more information go to www.p65warnings.gov
Product Features:
- Same features as Trail Series Rear Bumper and Tire Carrier
- Bumper ends fit more snug to vehicle
- Also available without tire carrier - custom order
- Weighs Approx 135lbs
JK Mule Rear Bumper With Smooth Tire Carrier
JK Mule Rear Bumper With Smooth Tire Carrier
Expedition One's JK Wrangler Mule Series Rear Bumper. Exclusive Smooth Motion Tire Carrier System.
Product Features:
- Designed to remove the weight of your spare tire from your door, protecting it from damage over time
- Can accomodate up to 37" spare tire with most wheel/tire combinations*
- 5 on 5 wheel pattern (OEM wheel pattern). Other wheel patterns are special order please contact us
- Carrier swings in unison with your rear door, access the rear gate without unlatching any locks or pins
- Integrated 1/2" clevis mounts for recovery
- Allows you to utilize your stock receiver hitch
- 100% Made in USA
- Made of 3/16" (7 gauge) high-grade US steel
- *Some wheel/tire combinations are heavier than others
- Weighs Approx 180lbs