2016 Chevy Silverado
2016 Chevrolet Silverado Front Bumper
2016 Chevrolet Silverado Front Bumper
Comprised of heavy duty 3/16 inch and 1/4 inch inner structure and 3/16 inch outer structure
Weighs approximately 120lbs lbs
Integrated feet forward winch mount included. Fits most winches rated between 8000-12,500 lbs (Exception - Warn M8274) May require relocation of solenoid.
Integrated 1 inch thick shackle mounts can accommodate a 3/4 inch shackle (purchase shackles here)
Integrated light ports hold a 4.75 inch round light
Three light mount tabs under center hoop area can accommodate up to 7" round lights
Made and designed in the U.S.A
Fits 2016 and up model years
2016 Chevrolet Silverado Rear Bumper
2016 Chevrolet Silverado Rear Bumper
Chevy Silverado 2016+ Rear Bumper with optional textured black powder coat.
* Please note that model years equipped with blind spot monitors may not function with an aftermarket bumper due to the monitor's capability to sense accurately through steel.
Chevy 1500 Rear Bumper for 2014-2018 with DUAL Swing Arm Carrier System
Chevy 1500 Rear Bumper for 2014-2018 with DUAL Swing Arm Carrier System
The Expedition One dual swing-out rear bumper with our innovative, patented locking latch system! An intuitive new way to open and close your swing arms with ease and reliability.
These carriers can be locked into place when fully opened providing the flexibility needed for overlanding and off-roading, and the ease of access you want in your daily driver. Our additional mounting options provide further customization to create the perfect setup for your outdoor adventuring needs.
Available Mounting Accessory Options
Hi-Lift Mount
Hi-Lift/Pul Pal Mount
Expedition One Geri Fuel/Water Mount & Latch
Scepter/NATO Fuel Can Mount (does not currently work with water cans)
Spare Tire Mount (recommended up to 37" tire)
Features:
Patented locking latch system design that offers an intuitive and easy way to access your truck
Universal plate backing on swing arms for limitless mounting configurations
Weighs approx. 225lbs
Additional Expedition One mounting products for spare tire, hi-lift, Geri /scepter/NATO cans, TREDs/Maxtrax, etc
Holds up to a 40" tire with certain wheel/tire combinations (recommended size: up to a 37" tire)
Quick access to arm bearings for easy maintenance
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
100% Designed & Made here in the U.S.A
* Please note that model years equipped with the blindspot monitor may not function with an aftermarket bumper due to the monitors capability to sense through steel.