Trail Series Front Bumper 2014+

Introducing the all-new 5th Gen 4 Runner front bumper! (2014+)

For the 5th Gen Toyota 4 Runner
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin.
Integrated feet forward winch mount
Weighs approx. 150 lbs
1" thick 3/4 recovery shackle mount (purchase 3/4" shackles here)
Optional center hoop and textured black powder coat (photos coming soon).
Optional bullbar style hoop
Fits winches rated between 8000-10,000 lbs.
Two light tabs on the top face of bumper for 6" to 8" lights(under center hoop if ordered with optional hoop)
Integrated light ports (see light options below)
Designed and made in The U.S.A

*This bumper is not designed to fit the TRDsport and Limited models. Limited model bumpers have been discontinued and are no longer available for purchase.

Winch Info
· Integrated feet forward winch mount
· Fits winches rated between 8000-10,000 lbs both integrated and non-integrated however Integrated solenoid models are recommended for best fit.
· Recommended Winch: ComeUp Solo 9.5rs
*KDSS models have slight adjustment to installation in one mounting location.
**Safety sensors on 2019+ models may not work with aftermarket bumper and/or winch installment. Relocation options for this sensor are now available for purchase.

We highly recommend customers wait until they have the product in hand to schedule installations.

This product contains chemicals known to the state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.gov

4Runner 2014+ Basic Dx Winch Mount

4Runner 2014+ Basic Dx Winch Mount
Approx weight 60-70 lbs
Optional center hoop*
Fits most small platform winches up to 10,000 lbs. **
NOT compatible with the Sport/Limited Models.
* Will not work with ACC/Collision sensors
** May require minor trimming/modification for certain solenoid options

We highly recommend customers wait until they have the product in hand to schedule installations. All cancellations are required in writing and will incur a 10% re-stock fee and any applicable packaging and shipping fees. Please review terms and conditions for details.

This product contains chemicals known to the state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.gov

Product Features:

• Approx weight 60-70 lbs
• Optional center hoop*
• Fits most small platform winches up to 10,000 lbs. **

Trail Series Dual Swing-Out Rear Bumper 2010+

Our latest design is now available!

Featuring dual swing-out arms with our trademark Smooth Motion tire carrier design and our industry-first patent-pending intuitive latch system. With years of design and development, we've provided a robust, easy-to-use locking latch design that provides a quicker and easier setup above anything else seen on the market today.

Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin.
Integrated light ports (see light options below)
1" thick 3/4 recovery shackle mounts
Weights Approx 220lbs
Utilizes your stock receiver hitch
Designed and made in The U.S.A
Industry-first, intuitive latch system design
Smooth Motion tire carrier system available in single and dual arm options

4Runner 2010+ Rear Bumper with Single Swing Tire Carrier

An Industry-First Latch Mechanism and Swing Motion Design keeps things Tight and Rattle-Free during extended or strenuous off-road adventures.


Specifications
· Single Swing Arm mounted on the passenger side
· Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
· Weighs Approx. 210lbs
· 1" thick 3/4 recovery shackle mount
· Optional textured black powder coat (see pricing options below)
· Optional back-up camera mount still functional with single swing option on passenger arm
· Utilizes stock receiver hitch
· Integrated light ports (see pricing options below)
· Designed and made in the USA
· Industry-first latch mechanism design for consumer ease of use
Available Mounting Accessory Options
· Hi-Lift Mount
· Hi-Lift/Pull-Pal Mount
· Expedition One Geri Fuel/Water Mount & Latch
· Scepter/NATO Fuel Can Mount
· Bolt-on Ladder for 4Runner
· Spare Tire Mount
· *Please note that if you plan to mount a spare tire you will not be able to mount any other accessories on the single swing arm other than items that mount on the back/inside of the arm such as the table or ladder. The back-up camera mount can also be mounted with the single arm as mounted on the passenger side.
*Tire Mounts: A narrow wheel with an extreme positive offset and a very wide tire will not work with the standard tire mount
* Please note that model years equipped with the blindspot monitor may not function with an aftermarket bumper due to the monitors capability to sense through steel.
We highly recommend customers wait until they have the product in hand to schedule installations.
This product contains chemicals known to the state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.gov

Trail Series Base Rear Bumper 2010+

Introducing our new rear bumper "base" design without tire carrier.

Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin.
Utilizes your stock receiver hitch
Weights approx. 120lbs
Integrated light ports (see light options below)
1" thick 3/4 recovery shackle mounts
Designed and made in The U.S.A

2010+ 4Runner Rock Sliders

4 Runner Trail Series Rocker Guards. Item ships common LTL carrier anywhere in the continental US.

Comprised of 3/16" and 1/8" sheet steel and 0.120" wall high strength tubing.
Triangular boxed structure for maximum strength and efficiency.
Tubing is comprised of 2" x 0.120" wall for the inner and 1.5" x 0.120" outer wall tubing.
Steps with aluminum tread plates assist in entering and exiting the vehicle.
Weights Approx 125lbs
Placed to maximize ground clearance.
Optional textured black powder coat (see pricing options below).
**KDSS-Compliant option

4Runner - Mule Ultra Roof Rack

Made of lightweight aluminum construction, our Mule roof rack brings some exciting new changes and features to the roof rack market.

Lightweight, aluminum construction
Dynamic load capacity: 250lbs | Static load capacity: 500lbs
Fits up to a 40" LED light bar
modular design
adjustable flooring design
flexible tie-down points
no drilling required
form-fitting around each vehicle application
RACK MODEL OUTSIDE WIDTH INSIDE WIDTH OUTSIDE LENGTH INSIDE LENGTH OUTSIDE HEIGHT
4R 47.64” 40.21” 91.74” 78.57” 4.83”
PRODUCT FEATURES:
Lightweight, aluminum construction
Fits up to a 40" LED light bar
modular design
adjustable flooring design
flexible tie-down points
form fitting around each vehicle application

Mule SAM 4Runner 10+ Roof Rack

Mule SAM 4Runner 2010+ Roof Rack. Budget friendly and built for function, this rack is a take-off on our Baki rack system
Comprised of 3/16" formed side rails mated with our proprietary HD extruded aluminum load bars
Comes standard with 3 proprietary extruded aluminum load bars and option to add 3 more bars for a total of 6 bars
Roof-top tent, awnings, shovel mount, etc. ready
Optional Front Facepate/Fairing
Rack rails come with textured Black powder coat finish
Optional Textured Black powder coating for load bars